APPLICATION GUIDELINES:
- Test a small area to determine cleaning results.
- Apply Lifeguard Sealer Remover liberally with a brush or roller.
- Allow Lifeguard Sealer Remover to remain on the surface for 20-30 minutes. If the remover begins to dry, mist lightly with water.
- Do not allow remover to dry on the surface.
- Use a stiff bristle nylon brush or broom to loosen.
- Rinse surface thoroughly with power washer.
- Before re-sealing, test prior to application.
LIMITATIONS:
- Do not thin.
- Multiple cleanings maybe necessary for severe build-up.
- Whitening may occur on some colored concrete surfaces.
COVERAGE:
- Porous Surface: 75-100 sq. ft./gal
- Dense Surface: 100-200 sa. ft./gal
IMPORTANT: Read product container before starting project.