APPLICATION GUIDELINES:
- Pre-wet the surface with water before applying.
- TEST A SMALL AREA to determine cleaning results.
- Apply Lifeguard Efflorescence Remover with a low-pressure plastic sprayer.
- Allow the cleaner to remain on the surface for 10-12 minutes.
- Use a stiff bristle nylon brush or broom to scrub the surface.
- Rinse surface thoroughly with power washer.
- Can be diluted with up to 5 parts of water.
- DO NOT ALLOW CLEANER TO DRY ON THE SURFACE.
- Important: After cleaning, neutralize the area with a solution of TSP.
LIMITATIONS:
- Use caution near colored concrete or grout.
- May etch natural stone, marble and sandstone.
COVERAGE:
- Porous Surface: 250 - 500 sq. ft./gal
- Dense Surface: 500 - 1000 sq. ft./gal
IMPORTANT: Read product container before starting project.